Home »
Our Products »
Sterilization » Autoclave Vertical
(Double Walled)
Autoclave Vertical (Double Walled)
APPLICATIONS
- Autoclave Vertical are most ideal for critical applications requiring
assured and reliable total destruction of all living micro- organisms
- Autoclave Vertical is low cost options for general
sterilization ideal tool for Laboratories, Hospitals, Nursing Homes, R&D
labs etc, Pharmaceutical, Food & Beverage Industries and
Institutions
SALIENT FEATURES &
CONSTRUCTION
- Inner & Outer Chamber, constructed from S. S. 304 Grade
- Bucket / Basket Made of Stainless Steel
- Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
- Operating range from 15psi to 20psi pressure
- Sterilizing Temperature up to 1340C
- Tested up to 2.5 times of required Pressure
- Voltage: 220 Volts AC (50 Hz)
- Water Level Indicator
- Lid Closing by Radial Locking System
- Sealing of Lid by Neoprene Rubber Gasket
TECHNICAL SPECIFICATIONS & ORDERING INFORMATIONS
| PARAMETERS |
MODEL ACV-1 |
MODEL ACV-2 |
MODEL ACV-3 |
| Inner Dimensions (Dia x Height) |
250x450mm |
300x500mm |
350x550mm |
| Inches Conversion |
10 x 18 |
12 x 20 |
14 x 22 |
| Capacity |
22 ltrs |
40 ltrs |
50 ltrs |
| Working Load |
2.0 KW |
2.0 KW |
3.0 KW |
| Gasket |
Made of Neoprene Rubber |
| Sterilizing pressure |
1.2 kgf / cm (15psi)at 121°c |
| Pressure Gauge |
0-2.1 kgf / cm² (30 psi) |
| Operating pressure |
From 15 to 20psi (Adjustable) |
| Inner Pressure Tank |
Stainless Steel (SS-304) |
| Top Lid |
Mild Steel Plate lined with Stainless
Steel from inside |
| Basket |
Made of Stainless Steel |
| Lid Tightening |
Radial Locking system worked by handle |
| Lid Opening |
Paddle lifting device |
| Water Level Indicator |
Fitted on the outer chamber |
| Boiler – Hydraulically Tested |
Upto +40 psi |
| Accuracy |
+ 3 psi |
| Safety Device |
Spring Loaded Type |
| Water Draining System |
Hand Operated Valve |
| Heating |
BY ISI Marked Immersion Heaters |
| Steam & Vacuum Release |
By Valve |
| Power Supply |
220/230V AC, 50/60Hz |
| PARAMETERS |
MODEL ACV-4 |
MODEL ACV-5 |
| Inner Dimensions (Dia x Height) |
450x600mm |
550x750mm |
| Inches Conversion |
18 x 24 |
22 x 30 |
| Capacity |
98 ltrs |
152 ltrs |
| Working Load |
4.0 KW |
6.0 KW |
| Gasket |
Made of Neoprene Rubber |
| Sterilizing pressure |
1.2 kgf / cm (15psi)at 121°c |
| Pressure Gauge |
0-2.1 kgf / cm² (30 psi) |
| Operating pressure |
From 15 to 20psi (Adjustable) |
| Inner Pressure Tank |
Stainless Steel (SS-304) |
| Top Lid |
Mild Steel Plate lined with Stainless
Steel from inside |
| Basket |
Made of Stainless Steel |
| Lid Tightening |
Radial Locking system worked by handle |
| Lid Opening |
Paddle lifting device |
| Water Level Indicator |
Fitted on the outer chamber |
| Boiler – Hydraulically Tested |
Upto +40 psi |
| Accuracy |
+ 3 psi |
| Safety Device |
Spring Loaded Type |
| Water Draining System |
Hand Operated Valve |
| Heating |
BY ISI Marked Immersion Heaters |
| Steam & Vacuum Release |
By Valve |
| Power Supply |
220/230V AC, 50/60Hz |
OPTIONAL FEATURES
| Present Pressure Operation |
Automatic Switch Piezostat (Pressure
Control Switch) |
| Heater Safety |
Automatic cut-off Device |
| Pre-set Time Operation |
By Mechanical / Digital Timers Analogue 0-60 minutes
|
| Temperature Display |
By Dial Type / Digital Temperature Indicators with
LED display. |
| Temperature Recording |
Thermograph with / without digital display –
Circular Type |
| Dry Sterilization |
Triple wall arrangement |
